BADU Eco Touch-pro Ficha De Montaje, Uso Y Mantenimiento página 22

Speed adjustable
1
Power
BADU Pool technologies and solutions.
WG27.50.020-P
After a voltage drop the pump automatically starts up again with
the speed last set, or remains stopped if it had been stopped
beforehand.
Pos: 24 /Technische Dokumentation/Allgemeine Module/####halbe Leerzeile #### @ 3\mod_1437024231169_0.docx @ 36332 @ @ 1
Pos: 25 /Technische Dokumentation/Allgemeine Module/####halbe Leerzeile #### @ 3\mod_1437024231169_0.docx @ 36332 @ @ 1
Pos: 26 /Technische Dokumentation/Pumpendatenblatt/Motorsteuerung/Eco/Übersicht möglicher Betriebs- und Fehlermeldungen @ 2\mod_1434606842713_370.docx @ 33396 @ @ 1
Overview of possible operating and error messages
If an error occurs, the motor switches off permanently. Exception
error: "Undervoltage". The motor automatically switches back on
as soon as the voltage is over 209 V for at least 6 seconds.
If an error occurs, the system must be disconnected from the
power supply. See chapter 2.2 of the original operating manual
"non self-priming and self-priming pumps with/without plastic
lanterns (AK version)".
Pos: 27 /Technische Dokumentation/Allgemeine Module/#### Seitenumbruch #### @ 0\mod_1426069111812_0.docx @ 891 @ @ 1
EN 22
GREEN
SET
3
2
OK
0
Error
The display of the control unit
switched off after 3 minutes without
action, except if an external control
unit for example emits a signal to the
pump every minute.
01|2016