Dspsurround - Aiwa AV-DV95 Manual De Instrucciones

DSPSURROUND
To adjust the volume and balance of the surrounld 2,,,,..
speakers
~+~;j
DSP
MULTI JOG
DOWN,UP
B
urcwJ
5%CJ MANUAL
C3R
SELECT
~:g=
at.=
\ a"
Qo a
DOWN,UP
The DSP (Digital Signal Processor) surround circuits can recreate
the effect of sounds reflected from walls or ceilings, to obtain the
sound presence of real environments. There are four modes with
matching graphic equalization modes. Equalization modes are
selected automatically and can also be selected or turned off to
suit your preference.
Press the DSP button, and turn the MULTI JOG until
the desired DSP mode is displayed.
The selected mode name is displayed for four seconds, and the
indicators appear on the left sides of the selected DSP name
and matching GEQ mode name.
Selected DSP mode
Matching GEQ mode
When the music source is monaural
Select LIVE to obtain a simulated stereo effect, When DANCE,
HALL or ARENA is selected, no sound will be heard from the
surround speakers,
To cancel the selected mode
Press the DSP button to display the DSP mode name, and press
the button again within 4 seconds, "DSP OFF" appears on the
display. Even if canceling the selected DSP mode, the matching
or selected GEQ mode still remains.
Press the MANUAL !3ELECT button on the remote control three
times to display "SUR 0d13° while the DSP system is turned on,
Then press the DOWN or UP button repeatedly or turn the MULTI
JOG within four seconds.
The DSP system i:; automatically canceled:
- When the Dolby lPro Logic is turned on
- When the DIGI1-AL (Dolby Digital or DTS) mode except
"2chSTERE0 is selected
The DSP system cannot be turned on:
- While the DIGI1-AL (Dolby Digital or DTS) mode except
"2chSTERE0 is selected
- While the Dolby lPro Logic is turned on
- While headphones are plugged in
To select with the remote control
Press the DSP button repeatedly until the desired DSP mode is
displayed.
Four DSP modes and "DSP OFF can be selected.
ENGLISH10