Solving Common Problems - Danby DAC6304DE Manual De Instrucciones

Solving Common Problems
Before contacting an authorized service center, perform the following simple checks.
They may save you the time and expense of an unnecessary call.
Problem
The air conditioner does
not ooerate at all
Explanation / Solution
4!, Check that the circuit breaker used for the air conditioner has not been
triggered.
4!, Check that the power cable is plugged into a wall socket and the socket is
switched on, if necessary.
4!, Check that the temperature indicator on the unit is lit; if necessary,
press the _ (On/Off) button on the remote control or unit.
The air conditioner does not 41,Check that there are no obstacles between you and the unit.
ooerate with the remote 41, Replace the remote control batteries if necessary.
contro I, Check that you are close enough to the unit (seven metres/yards or less).
No Deeo is heard tvhen you I, Check that you are pointing the remote control at the remote control sensor
oress the (L) (On/Off_ button on the unit.
on the remote control I, Replace the remote control batteries if necessary.
The air conditioner does not 41,Check that the correct operating mode has been selected(Cool).
cool 41,The room temperature may be too low.
41, Dust may be blocking the air filter; refer to page 17 for cleaning instructions.
I, Check that there is no obstacle blocking the air flow into or out of the unit.
The timer is not correc W trig- I, Check that the timer has been programmed correctly; refer to page 12-14.
gered
Odors are permea[ing me 4i, Ventilate the room.
room during air conditioning
®