Remote Control; Cooling Your Room; Control Panel - Danby DAC6304DE Manual De Instrucciones

Acondicionador de aire domestico sistema de tipo ventana
Ocultar thumbs Ver también para DAC6304DE:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Cooling Your Room
Remote Control
Control Panel
You must select the Cool
mode if you wish to lower the temperature
in your room.
You can also set the Fan speed.
1
Press the _ (On/Off) button.
Result:
• The air conditioner
starts up in the Cool mode.
• The unit beeps twice.
The air conditioner
is fitted with a protection mechanism
to prevent
the unit from being damaged
when it is started immediately
after
being:
• Plugged in
•Stopped
It will start up normally after three minutes.
If the temperature
is not displayed
on the control panel:
Press the Q
button on the remote control
or
Press the _
button on the unit one or more times until the
temperature
is displayed.
Result:
• The unit beeps each time you press the Q
/ _
button.
tThe
air conditioner
starts up in the Cool mode.
You can change modes at any time.
To adjust the temperature,
press the _or
_
buttons on the remote
control or unit one or more times until the desired temperature
is displayed.
The temperature
can be set between
18°C and 30°C.
Result:
Each time you press the r-s--Ior
1--5--1 buttons:
- The temperature
is adjusted by 1°C and displayed on
the control panel
- The unit beeps
The air conditioner
starts cooling, if the room temperature
is
higher than the selected temperature.
If the room temperature
reaches the set temperature,
the air
conditioner
stops cooling, but the fan is still operating.
To set the fan speed:
• ' Press the Q,_
or@
button on the remote control as desired.
or
Press the _
button on the unit one or more times until the
desired Fan speed(F1,
F2 or F3) is displayed.

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Dac8404deDac12344deDac14004dDac18030

Tabla de contenido