Protecting The Environment - DeWalt DW621 Manual De Instrucciones

Lubrication
Your power tool requires no additional lubrication.
Cleaning
WARNING: Blow dirt and dust out of the main housing with dry air as
often as dirt is seen collecting in and around the air vents. Wear
approved eye protection and approved dust mask when performing this
procedure.
WARNING: Never use solvents or other harsh chemicals for cleaning
the non-metallic parts of the tool. These chemicals may weaken the
materials used in these parts. Use a cloth dampened only with water and
mild soap. Never let any liquid get inside the tool; never immerse any part
of the tool into a liquid.
Use only a DRY cloth to wipe the plunge rods. These rods require
no lubrication. Lubricants attract dust, reducing the performance of
your tool.
Repairs
To assure product SAFETY and RELIABILITY, repairs, maintenance
and adjustment (including brush inspection and replacement) should
be performed by authorized service centers or other qualified service
personnel, always using identical replacement parts.
Accessories
WARNING: Since accessories, other than those offered by D
have not been tested with this product, use of such accessories with this
tool could be hazardous. To reduce the risk of injury, only D
recommended accessories should be used with this product.
Recommended accessories for use with your tool are available at extra
cost from your local dealer or authorized service center.

Protecting the Environment

Separate collection. This product must not be disposed of with
normal household waste.
Should you find one day that your D
or if it is of no further use to you, do not dispose of it with household
waste.
Separate collection of used products and packaging allows
materials to be recycled and used again. Re-use of recycled
materials helps prevent environmental pollution and reduces the
demand for raw materials.
Local regulations may provide for separate collection of electrical
products from the household, at municipal waste sites or by the retailer
when you purchase a new product.
D WALT provides a facility for the collection and recycling of D
e
products once they have reached the end of their working life. To take
advantage of this service please return your product to any authorized
service center that will collect them on our behalf.
You can check the location of your nearest authorized service center by
contacting your local D
is included in the packaging of this product.
DW621-AR DW621-B2
Voltage 220V ~
50Hz
Frequency 1100W
WALT,
e
Speed 8000-
WALT, 24000 rpm
e
30
WALT product needs replacement,
e
WALT office. Alternatively, a service center listing
e
SPECIFICATIONS
DW621-B3
220V ~ 120V ~
50-60Hz 50-60Hz
1100W 1100W
8000- 8000-
24000 rpm 24000 rpm
WALT
e
DW621-BR
127V ~
60Hz
1100W
8000-
24000 rpm