Maintenance; Cleaning; Metrological Verification; Warranty - Chauvin Arnoux Y4N Manual De Instrucciones

4.4.3 Mechanical protection
- Degree of protection IP20 (i.a.w. IEC 529) with jaws closed
- Free fall: 1.5 m (i.a.w. IEC 68-2-32)
- Shock: 100 g (i.a.w.IEC 68-2-27)
- Vibration: 0.15 mm -10/55/10 Hz (i.a.w.IEC 68-2-6)
4.4.4 Flammability rating
- V0 (i.a.w. UL 94)
For maintenance, use only specified spare parts. The manufacturer will not be held responsible
for any accident occuring following a repair done other than by its After Sales Service or approved
repairers.
5.1

Cleaning

The clamp must be disconnected from all electrical sources and not enclose a cable.
Do not subject the clamp to running water.
I I I I I Keep the jaw faces perfectly clean. The jaw faces must be cleaned with a lightly oiled soft cloth.
I I I I I Clean the case with a cloth slightly moistened with soapy water.
Rinse with a dry cloth. Then dry quickly with a cloth or in a hot air stream ( 80 °C max.)
5.2

Metrological verification

It is essential that all measuring instruments are regularly calibrated.
For occasional daily use, we recommend that an annual calibration be carried out.
When the instrument is used continuously every day, we recommend that a calibration is carried out
every 6 months.
For checking and calibration of your instrument, please contact our accredited laboratories (list on request)
or the Chauvin Arnoux subsidiary or Agent in your country.
Repairs
Repairs under or out of guarantee: please return the product to your distributor.
Our guarantee is applicable for twelve months after the date on which the equipment is made available
(extract from our General Conditions of Sale, available on request).

5. MAINTENANCE

6. WARRANTY

15