Features; Charging The Internal Battery Of The Instant Power - Schumacher Electric INSTANT POWER XP2260 Manual Del Usuario

Ocultar thumbs Ver también para INSTANT POWER XP2260:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

4
3
2
1

CHARGING THE INTERNAL BATTERY OF THE INSTANT POWER

IMPORTANT! CHARGE IMMEDIATELY
AFTER PURCHASE, AFTER EACH USE
AND EVERY 30 DAYS, TO KEEP THE
INSTANT POWER'S INTERNAL BATTERY
FULLY CHARGED AND PROLONG
BATTERY LIFE.
CHECKING THE LEVEL
OF THE INTERNAL BATTERY
Check the internal battery's charge level by
pressing the Display Button. The Digital
Display will show the battery's percent of
charge. Charge the internal battery if the
display shows it is under 100%.
NOTE: The internal battery's percent of
charge is most accurate when the Instant
Power has been disconnected from all
devices and charging sources for a few hours.
CHARGING THE INTERNAL BATTERY
Charge the internal battery for the Instant
Power using an extension cord (not included).
NOTE: Use of an improper extension cord
could result in a risk of fire and electric shock.

FEATURES

10
9
8
7
6
5
14
15
16
18
11
1. Compressor gauge
12
2. Compressor/inflator switch
3. Inflator port
13
4. Deflator port
5. 12 Volt DC outlets
6. USB port
7. Jump start/USB On/Off switch
8. Digital display
9. Built-in work light
10. Display button
11. Work light On/Off switch
12. Inverter On/Off switch
13. 120 Volt AC outlets
14. Charger port
15. Compressor hose
16. Battery clamps
17
17. Adapters
18. Inflator hose
1. To charge, plug an extension cord into the
charger port on the back of the jump starter.
2. Plug the extension cord into a 120VAC
electrical wall outlet. While the jump starter
is connected to an AC outlet, the green LED
on the back of the unit will be on.
3. Monitor the progress of the charge by
pressing the display button on the front
of the unit. When the internal battery is
fully charged, the display will show100.
Complete charging may take up to 72 hours.
The jump starter is then ready to use.
4. When fully charged, the charger will
automatically go into maintain mode and
maintain the battery at full charge without
damaging it.
5. Charge the jump starter as soon as
possible after use.
CHARGING THE INTERNAL BATTERY
WHILE DRIVING
You may also charge the internal battery
while driving, using a male-to-male
charger cable (part number 94500109 –
not included).
4

Publicidad

Tabla de contenido
loading

Tabla de contenido