Dometic PW 3800 Instrucciones De Montaje página 12

Connecting the awning
Programming the wall switch (accessory)
➤ Place the battery (see fig. h 1, page 2).
➤ Switch on the power supply.
✓ The receiver beeps once briefly.
➤ Press the buttons
page 2) within 4 seconds.
✓ The receiver beeps once briefly.
➤ Press the buttons
page 2) again briefly.
✓ The receiver beeps once briefly.
➤ Briefly press the button
✓ The receiver beeps four times briefly.
✓ The awning moves briefly.
Pairing another remote control or wall switch (accessory)
Proceed as follows to pair another remote control:
➤ Press the programming button of the programmed remote control (fig. h 2,
page 2) twice.
✓ The receiver beeps twice briefly.
➤ Press the programming button of the remote control to be paired (fig. h 2,
page 2).
✓ The receiver beeps five times briefly.
✓ The remote controls are now set to one another.
Proceed as follows to pair the wall switch (accessory):
➤ Press the programming button (fig. h 2, page 2) twice.
✓ The receiver beeps twice briefly.
➤ Press the buttons
page 2).
✓ The receiver beeps five times briefly.
✓ The remote control and wall switch are now set to one another.
12
on the wall switch simultaneously (fig. i 1 and 2,
and
on the wall switch simultaneously (fig. i 1 and 2,
and
(fig. i 1, page 2).
on the wall switch simultaneously (fig. i 1 and 2,
and
PW3800
EN