Troubleshooting - Kicker KMC2 Manual Del Propietário

TROUBLESHOOTING

If your KMC2 does not appear to be working, check the obvious things fi rst such as blown fuses, poor or incorrect wiring connections
etc. If you're using an amplifi er, check for incorrect setting of crossover switches and gain controls etc.
No or low output?  Check the balance control on the KMC2.  Check the speaker output connections.
Power cycle the KMC2.

Reduced volume? Reverse a speaker connection from positive to negative on the stereo channel(s); if the volume improves, the
speaker was out of phase.
Factory reset: Reset the KMC2 to factory default settings by pressing and holding the MODE button for eight seconds.
If you have more questions about the installation or operation of your new KICKER product, see the Authorized KICKER Dealer where
you made your purchase. Please E-mail support@kicker.com or call Technical Services (405) 624-8583 for unanswered or specifi c
questions.
10