Specs - Kicker KMC2 Manual Del Propietário

SPECIFICATIONS
Model
Power Output @ 14.4V, 4Ω stereo, <10% THD+N
Frequency Response [Hz]
Signal-to-Noise Ratio [dB]
Input Sensitivity
USB Playback
USB Charging
USB Compatible File System
Line-Out Level [V]
Outer Trim Ring Diameter [in, cm]
Protrusion From Mounting Surface [in, cm]
Total Mounting Depth [in, cm]
Mounting Panel Thickness Range [in, cm]
Authorized KICKER Dealer:
Purchase Date:
Serial Number:
5
Be careful not to drill into wiring or vehicle mechanisms.
You are solely responsible for securely mounting the KMC2
Media Center. See page 2–3 for mounting hole cutout
template.
KMC2
25W x 4
Before installation, you may wish to plan your placement
of the USB and Auxiliary inputs, and the optional PXiRCX
20 – 20k
remote (sold separately), for both convenience and looks!
95
500mV
With a KICKER KXM amplifi er, a pair of KICKER KM
speakers, and a few KICKER cables, you're looking at a full
MP3
system upgrade that will dominate! KICKER amplifi ers and
DC 5V, 1A
accessories make upgrading a snap. Ask your dealer about
KICKER amplifi ers and speaker upgrades to complete your
FAT32
system!
4
4-1/2, 11.3
All specifi cations and performance fi gures are subject
to change. Please visit www.kicker.com for the most
1-1/8, 2.75
current information.
4, 10.1
1/4-2, .6-5 WARNING: KICKER products are capable of producing sound levels
that can permanently damage your hearing! Turning up a system to a level
that has audible distortion is more damaging to your ears than listening to
an undistorted system at the same volume level. The threshold of pain is
always an indicator that the sound level is too loud and may permanently
damage your hearing. Please use common sense when controlling
volume.