HJM ACP9001 Instrucciones De Uso página 111

Aire ACP9001 Inglés_Maquetación 1 04/01/18 17:39 Página 111
INTRODUCTION FOR BUTTONS ON REMOTE
CONTROLLER
NOTE:
- This is a general use remote controller, it could be used for the air
conditioners with multifunction; For some function, which the model
doesn't have, if press the corresponding button on the remote con-
troller that the unit will keep the original running status.
- After putting through the power, the air conditioner will give out a
sound. Operation indictor "
can operate the air conditioner by using remote controller.
- Under on status, pressing the button on the remote controller, the
signal icon "
and the air conditioner will give out a "de" sound, which means the
signal has been sent to the air conditioner.
- Under off status, set temperature and clock icon will be displayed
on the display of remote controller (If timer on, timer off and light
functions are set, the corresponding icons will be displayed on the
display of remote controller at the same time); Under on status, the
display will show the corresponding set function icons.
Press this button to turn unit on/off.
Pressing this button once can select your required mode circularly as
below (the corresponding icon "
selected):
" is ON (red indicator). After that, you
" on the display of remote controller will blink once
- 111 -
" will be lit up after the mode is
E
N
G
L
I
S
H