Ear Temperature Measurement:
1. Place a new, clean Protective Cover onto the sensor.
2. Press the ON/OFF Button "
beep three times and the LCD Display will activate.
3. The ear canal is slightly curved. Pull the ear slightly up and backwards
and then insert the sensor so the tip of the protective cover points
directly at the eardrum.
4. With the sensor properly in place, press the START Button.
5. After about a second, the thermometer will beep once and display the
measurement. Press the ON/OFF Button to shut the thermometer off.
NOTE: If no buttons are pressed for one minute, the thermometer will shut off.
Fever indicator:
If the measured temperature is below 100.4 °F (38 °C), a smiley face "
with a short beep. If the measured temperature is 99.5 – 100.3 °F (37.5 – 37.9 °C), two short beeps will also
sound, indicating a slightly raised temperature. If the measured temperature is 100.4 °F (38 °C) or greater,
a sad face "
" appears in the LCD Display and the device will emit one short, one long, and three short
beeps.
" to switch the thermometer on; it will
7
->
" appears in the LCD Display along