General Guidelines - Velleman HQ Power ASTAR III Manual Del Usuario

3.

General Guidelines

Refer to the Velleman® Service and Quality Warranty on the last pages of this manual.
Keep this device away from dust and extreme temperatures. Make sure the ventilation
openings are clear at all times. For sufficient air circulation, leave at least 6" (± 15 cm)
in front of the openings.
Protect this device from shocks and abuse. Avoid brute force when operating the device.

Familiarise yourself with the functions of the device before actually using it. Do not allow operation by
unqualified people. Any damage that may occur will most probably be due to unprofessional use of the device.

All modifications of the device are forbidden for safety reasons. Damage caused by user modifications
to the device is not covered by the warranty.

Only use the device for its intended purpose. All other uses may lead to short circuits, burns, electroshocks,
lamp explosion, crash, etc. Using the device in an unauthorised way will void the warranty.

Damage caused by disregard of certain guidelines in this manual is not covered by the warranty and
the dealer will not accept responsibility for any ensuing defects or problems.

Mechanical wear and LEDs are not covered by warranty.

A qualified technician should install and service this device.

Do not switch the device on immediately after it has been exposed to changes in temperature.
Protect the device against damage by leaving it switched off until it has reached room temperature.

This device is designed for professional use on stage, in discos, theatres, etc.

Use the appropriate power supply (see Technical Specifications below).

Lighting effects are not designed for permanent operation: regular operation breaks will prolong their lives.

There may be some smoke or a particular smell when the device is activated for the first time. This is
normal and any smoke or smell will gradually disappear.

Use the original packaging if the device is to be transported.

Keep this manual for future reference.
4. Features
The ASTAR III is a newly developed LED effect. This sound-activated light is a modern version of a
traditional derby light shining in a whole new way. The ASTAR III features broader coverage than derby
effects twice its size, using sharp, laser-like multi-colour beams, shining through 48 groups of
professional optical lenses. This light will punch through nearly any ambient lighting. Dazzling RGBW
colour beams cross and rotate, illuminating the whole area in sparkling light.

uses four high-power RGBW LEDs

with 6 x 8 groups of professional optical lenses for fine and smooth light spots

192 beams provide rich multicolour effect

350° rotation effect

digital display control panel, DMX control, power linkable
5. Overview
Refer to the illustrations on page 2 of this manual.
1
adjustment knob and microphone
2 display and navigation buttons
V. 01 – 01/10/2015
VDPL403DD
3
DMX input and output
4 power input and output
5 ©Velleman nv