Defrosting The Cooler; Replacing The Device Fuse - Dometic CoolFreeze CFX28 Instrucciones De Uso

Nevera por compresor
Ocultar thumbs Ver también para CoolFreeze CFX28:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

CFX28 – CFX65DZ
7.10

Defrosting the cooler

Humidity can form frost in the interior of the cooling device or on the evapo-
rator. This reduces the cooling capacity. Defrost the device in good time to
avoid this.
A
NOTICE! Danger of damage!
Never use hard or pointed tools to remove ice or to loosen objects
which have frozen in place.
To defrost the cooler, proceed as follows:
➤ Take out the contents of the cooling device.
➤ If necessary, place them in another cooling device to keep them cool.
➤ Switch off the device.
➤ Leave the lid open.
➤ Wipe off the defrosted water.
7.11

Replacing the device fuse

D
DANGER! Danger of electrocution!
Disconnect the power supply and the connection cable before you
replace the device fuse.
➤ Disconnect the power supply to the device.
➤ Pull off the connection cable.
➤ Pry out the fuse insert (fig. 4 2, page 4) with a screwdriver.
➤ Replace the defective glass fuse with a new one that has the same rating
(4 A 250 V).
➤ Press the fuse insert back into the housing.
➤ Reconnect the power supply to the device.
EN
Operation
21

Publicidad

Tabla de contenido
loading

Tabla de contenido