Charging The Battery - Peaq PPA44BT-W Manual De Instrucciones

Operation
TURNING ON/OFF
To turn on, press and hold the
ton for approx. 3-5 seconds. Press
the button until the speaker turns
off.
ADJUSTING THE VOLUME
Press and hold the button
to adjust the volume.
CLIP
There is a pop up clip at the bottom
of speaker. If you want to hang the
speaker, e.g. on a hook, pop up the
clip.
_PPA44BT_W_160322_V05_HR.indb 27

Charging the battery

1. Connect the USB cable (included)
to the speaker.
but-
2. Connect the other end of the USB
cable to the USB port of the com-
puter or a USB-charger.
3. During the battery charging the
LED indicator lights continuously
or red.
LED Status
• Red:
LED turns on continuously: Bat-
tery charging.
LED turns off: Battery charging
complete.
Note
During the battery charging process
the speaker cannot be operated. It
will take approx. 4 hours to be fully
charged the battery.
• Blue:
LED flashing: Turn on and ready for
Bluetooth
LED continously on: Paired with a
Bluetooth
ENGLISH
pairing.
®
device.
®
27
22/3/16 4:51 PM