Echo LBP-560-900 Manual De Instrucciones página 15

1. Power cable
2. Guide
1.Belt
1.Adapter holder
1. Hook
2. Cable guide hook
3. Battery pack
2. Buckle
2. Waist belt
3. Power cable
Before you start
3. Remove the power cable that is fixed with a guide, and push
it into a guide in the direction of use.
4. Put the battery cover, and fasten the hook and loop fasten-
ers on the left and right sides in a reverse procedure.
5. Fasten the belt on the front with the hook and loop fastener
with the belt through the buckle in reference to the illustra-
tion.
6. Remove the adapter holder and put it into the side where the
power cable comes out. It can be removed by taking off the
hook and loop fastener inside the adapter holder.
Fixing power cable
The power cable between the battery and the power tool has
length with a margin. Clamp the power cable because it may
get caught by an arm or branches of trees, or get cut with the
power tool during operation if the power cable is loose.
1. Assemble a cable guide hook on a hook among those which
are assembled at four portions on the harness in such a po-
sition that it will be easy to use.
2. Put the power cable through the cable guide hook.
13