Featuresand Controls - Briggs & Stratton 030451-0 Manual Del Operario

Featuresand Controls
Read this Operator'sManual and safety rules beforeoperating yourgenerator.
Compare the illustrations with your generator, to familiarize yourself with the locations of various controls and
adjustments. Save this manual for future reference.
A - FuelTank -- Capacity of six (6) U.S. gallons.
B- Oil Fill Cap-- Checkand add engine oil here.
C - Oil Drain Plug-- Drain engine oil here.
D - 120 Volt AC, 20 Amp, Duplex Receptacles-- May be
used to supply electrical power for the operation of
120 Volt AC, 20 Amp, single phase, 60 Hz electrical,
lighting, appliance, tool and motor loads.
E - 120/240 Volt AC, 30 Amp LockingReceptacle-- May
be used to supply electrical power for the operation of
120 and/or 240 Volt AC, 30 Amp, single phase, 60 Hz
electrical, lighting, appliance, tool and motor loads.
F - RockerSwitch CircuitBreaker-- The receptacles are
provided with a rocker switch circuit breaker to protect
the generator against electrical overload.
G - GroundingFastener-- Consult your local agency having
jurisdiction for grounding requirements in your area.
H - Identification Label -- Provides model, revision and
serial number of generator. Pleasehave these readily
availablewhen calling for assistance.
J - Spark Arrester Muffler -- Exhaust muffler lowers engine
noise and is equipped with a spark arrester screen.
K - Air Cleaner -- Protects engine by filtering dust and
debris out of intake air.
L - Engine Identification-- Provides model, type and code
of engine. Pleasehave these readily available if calling for
assistance.
M - Recoil Starter -- Used to start the engine manually.
II - Engine RockerSwitch -- Set this switch to "On"before
using recoil starter. Set switch to "Off"to switch off
engine.
P - ChokeLever- Used when starting a cold engine.
R- Fuel Valve-- Used to turn fuel supply on and off to
engine.
10 BRIGGSandSTRATTON.COIVl