Velleman WT3116 Manual Del Usuario página 3

3. Setting up the Scoreboard
 Supply power to the board by connecting the PSU with the power input (see fig. 1). Plug the PSU into the
 Turn on the scoreboard with the ON/OFF switch. It takes a few moments for the board to initialize.
mains.
 Press GAME SELECT once. The timer & score mode LED blinks.
 Press CLEAR. Next, set the desired timer with M+1/M-1 and S+1/S-1, and set the shot clock with S+1/S-1
 Press the timer START/STOP button to start the timer and the shot clock, and let it run for a few seconds.
under the shot clock panel.
 Press RESET TIMER and RESET SHOT CLOCK. The display will show the last memorized data.
Press the timer START/STOP button again.
 Press GAME SELECT to exit the setup mode.
4. Operation
A. TIMER & SCORER (basketball, handball, karate, wrestling)
This game mode displays the remaining game time and the score.
Upper display: game time (max. 99:59)
Lower display: score (max. 199)
Countdown Game Timer
Operation
1. Select game
2. Recall last memory
3. Erase previous settings
4. Set game time (e.g. 20 min)
5. Set shot clock
6. Shot clock time is memorized
7. Set period
8. Shot hits rim
9. Game interrupted
10. Restart game & shot clock starts
10.1. 30 seconds expire
WT3116_v2
Key
Timer Shot Clock
- 3 -
Display Buzzer
0:00
0 0
20:00
0 0
0:00
0 0
20:00
0 0
20:00
0 0
19:59
0 0
1234
●●●●
19:58
0 0
19:50
0 0
19:49
0 0
19:28
0 0
VELLEMAN