Determining Wall Plate Location - GE JVM1950 Instrucciones De Instalación

Installation Instructions
DETERMINING WALL PLATE LOCATION UNDER YOUR CABINET
Plate position - beneath flat bottom
cabinet
Plate position - beneath framed recessed
cabinet bottom
o
Mounting PlateTabs
Touching the Cabinet
:.Bottom
At least 30", up to 36"
Mounting Plate Tubs
Touching the Back
Frame
II "30" to Cooktop
i ,, I
Plate position - beneath recessed bottom
cabinet with front overhang
0
0
C
Mounting Plate
with Tabs Below
CabinetBottom
the SameDistance
asthe Front
'....Overhang Depth
..
..
-..
l
;0" to Cooktop
I
Your cabinets may have decorative trim that interferes
with the oven installation. Remove the decorative trim
to install the oven properly and to make it level.
THE OVEN MUST BE LEVEL.
Use (] level to make sure the cabinet bottom is level.
If the cabinets have (] front overhang only, with no back
or side frame, install the mounting plate down the some
distonce us the front overhung depth. This will keep
the oven level.
[_ Measure the inside depth of the front overhung.
[_ Draw (] horizontal line on the buck wall tin equal
distance below the cabinet bottom us the inside depth
of the front overhung.
[_ For this type of installation with front overhung only,
align the mounting tubs with this horizontal line, not
touching the cabinet bottom us described in Step D.
9