Installing The Battery And Microsd Card; Inserting A Microsd Card - LG Ignite Manual Del Propietário

The Basics
4

Installing the Battery and microSD Card

NOTE
It is important to fully charge the battery before initial use of the phone.
The phone comes with a rechargeable battery. Keep the battery
charged while not in use in order to maximize talk, use, and standby
time. The battery charge level is shown at the top right corner of the
screen.
1. Hold the phone
with both hands
and use the
fingertip cutout at
the bottom part of
the phone to pull
open the back cover
(as shown above).

Inserting a microSD card

Remove the back cover and locate the microSD card slot.
1.
. Position the microSD card with the label facing up and slide it into
2
place until it is fully inserted and locked in place.
G
NOTE
The microSD card can be easily damaged by improper operation. Please be
careful when inserting, removing or handling it.
G
To safely remove the microSD card from your phone, unmount it from your
phone first.
2. Align the battery
contacts with the
terminals near the
top of the phone,
then press the
battery into place.
3. Replace the back
cover over the back
of the phone (as
demonstrated).
Apply a steady
downward pressure
until it clicks into
place.