The Basics
14
Installing the Battery and microSD Card
NOTE
It is important to fully charge the battery before initial use of the phone.
Installing the battery
The phone comes with a rechargeable battery. Keep the battery charged
while not in use in order to maximize talk, use, and standby time. The battery
charge level is shown at the top right corner of the screen.
1 Use the fingertip
cutout at the bottom
of the phone to
remove the back
cover.
Removing the battery
Turn the power off. Remove the battery cover (as demonstrated in the previous
instructions). Then use the fingertip cutout at the top left of the battery
compartment to lift the battery out.
2 Align the battery
contacts with
the terminals
in the battery
compartment and
push the battery
down until it clicks
into place.
3 Place the battery
cover over the
battery compartment,
then press it
downward until it
clicks into place.