Troubleshooting - Black and Decker GSL35 Manual De Instrucciones

Problem
• Battery won't charge.
Possible Cause
• Charger not plugged into a working outlet.
or not plugged into shear shrubber.
• Charger plug not fully inserted into tool socket.
• _Surroundlng a_rtemperature too not or too COld.
TROUBLESHOOTING
Possible Solution
• Plug charger into a working outlet. Refer to
"Important Charging Notes" for more details.
• Check current at receptacle by plugging in a
lamp or other appliance.
• Check to see if receptacle is connected to a
light switch which turns power off when you turn
out the lights.
• Check to be sure charger plug is fully inserted
into tool charging socket.
• Move charger and tool to a surrounding a_r
temperature of above 40 degree F(4.5°C) or
below 105 degree F (+40.5°C).
For assistance, visit our website www.blackanddecker.com for the location of the service center nearest you or call the BLACK &
DECKER help line at 1-800-544-6986.
Imported by
Black & Decker(U.S.)lnc.,
701E. Joppa Rd.
Towson, MD 21286 U.S.A.
Powered by an
ENERGY STAR _
qualified battery
charger for a
better environment
See 'Tools-Electric' [-_
- Yellow Pages -
for Service & Sales