Night Light Function - babymoov Hygro+ Instrucciones De Uso

SETTING THE HYGROMETRY LEVEL
Press during 3 seconds to set the automatic stop of Hygro+.
auto
- «90%» flashes. Press + /- to select the appropriate hygrometry level.
- Press for 3 seconds to enter the setting and activate the setting.
auto
becomes blue. The current humidity level of the room is displayed.
auto
Your Hygro+ humidifier will automatically stop once the requested humidity level is reached.
Press briefly to check the setting.
auto
The hygrometry level is displayed for 3 seconds.
How to change the setting:
- Press for 3 seconds. The last setting flashes on the display.
auto
- Press + /- to select a new hygrometry level.
- Press for 3 seconds to enter and activate the new setting. .
auto
becomes blue. The current hygrometry level of the room is displayed.
auto
To disable the setting and go back to manual mode, press «ON/OFF» for 5 seconds.
auto
SETTING THE HYGROMETRY LEVEL + REGULATOR (COUNTDOWN)
In order to set the automatic stop of Hygro+, press
- «90%» flashes. Press + /- to select the appropriate hygrometry level.
- Briefly press : «00:00» is displayed and flashes. Press «+ /-» to set the timer with 30-minute brackets (e.g.: 00:30 / 01 :00 /
auto
01 :30, etc.).
N.B.: a longer pressure on «+/-» will help you set the timer faster.
- Press for 3 seconds to enter and activate the new setting.
auto
becomes blue. The current hygrometry level of the room is displayed.
auto
Your Hygro+ humidifier will automatically stop once the requested humidity level is reached OR when the timer reaches «00:00».
Press briefly to check the setting.
auto
The hygrometry level is displayed for 3 seconds. The timer will then appear for 3 seconds before the initial display appear.
How to change the setting:
- Briefly press . The last setting flashes on the display.
auto
- Press + /- to select the appropriate hygrometry level.
- Briefly press : «00:00» is displayed and flashes. Press «+ /-» to set the timer with 30-minute brackets (e.g.: 00:30 / 01 :00 /
auto
01 :30, etc.).
N.B.: a longer pressure on «+/-» will help you set the timer faster.
- Press for 3 seconds to enter and activate the new setting.
auto
becomes blue. The current hygrometry level of the room is displayed.
auto
To disable the setting and go back to manual mode, press «ON/OFF» for 5 seconds.
auto
DIFFUSING ESSENTIAL OILS
You can also diffuse essential oils with Hygro+.
Simply place a few drops of essential oil in the cup (2) and turn on the vapour function.
ATTENTION:
- Never pour essential oil directly into the water tank or chimney.
- Consult your physician for advice on suitable essential oils depending on your child's age.
- Keep essential oils out of children's reach.
- Consult your physician immediately if swallowed.
The Hygro+ night light function has seven different colours.
Press the night light button
The night light changes colour each time you press the night light button
To automatically change colours (rainbow function), press the night light button
Hygro+''s thermometer function lets you display the temperature in the room in which it is installed.
N.B.: to switch the temperature unit (°C / °F): press for 3 seconds on «+» and «–» at the same time. The recommended
temperature for your child's bedroom is between 19 and 21 °C.
for 3 seconds.
auto

NIGHT LIGHT FUNCTION

to turn on the night light.
THERMOMETER FUNCTION
HYGRO + • Instructions for use
becomes white again..
auto
becomes white again.
auto
.
for three seconds.
9