Cycle Guide - Maytag 4GMEDX500YW2 Manual De Uso Y Cuidado

CYCLE GUIDE — SENSOR DRY CYCLES
Not all cycles and settings are available on all models. Settings and options shown in bold are default settings for that cycle.
SENSOR DRY CYCLE - Senses moisture in the load or air temperature and shuts off when the load reaches the selected dryness
level. Gives the best drying in the shortest time. Drying time varies based on fabric type, load size, and dryness setting.
Depending on model, temperature may be selected on cycle knob or be a separate control.
Items to dry: Cycle:
Jeans, heavy work More Dry
clothes, towels
Normal
Work clothes,
medium weight
fabrics, sheets
Casual, shirts, Less Dry
pants, lightweight
items
NOTE: If loads do not seem as dry as you would like, select More Dry next time you dry a similar load. If loads seem drier than you
like, select Less Dry next time you dry a similar load.
CYCLE GUIDE — TIMED DRY CYCLES
Not all cycles and settings are available on all models. Settings and options shown in bold are default settings for that cycle.
TIMED DRY - Will run the dryer for the specified time on the control. Depending on model, temperature may be selected on cycle
knob or be a separate control.
Items to dry: Cycle:
Any load Timed Dry
Rubber, plastic, heat Timed Dry
sensitive fabrics
COOL DOWN – This step is added to any cycle that uses heat. The load is cooled slowly to reduce wrinkling and make it easier to
handle.
Setting the Drying Temperature
If your dryer has multiple heat settings:
A High heat setting may be used for drying heavyweight
■
items such as towels and work clothes.
A Low to Medium heat setting may be used for drying
■
medium-weight items such as sheets, blouses, dresses,
underwear, permanent press fabrics, and some knits.
6
Drying
Temperature:
High
Wrinkle Prevent
Medium
Low
Drying
Temperature:
Any
Wrinkle Prevent
Air Dry
Wrinkle Prevent
Available
Modifiers:
Temp Level Gives the best drying in the shortest time.
Drying time varies based on fabric type, load
size, and dryness setting.
Select a drying temperature based on the
fabrics in your load. If you are unsure of the
temperature to select for a load, select the
lower setting rather than the higher setting.
Available
Modifiers:
Temp Level Dries items to a damp level for items that do
not require an entire drying cycle.
Select a drying temperature based on the
fabrics in your load. If you are unsure of the
temperature to select for a load, select the
lower setting rather than the higher setting.
Temp Level Use a no heat (air dry) setting for foam, rubber,
plastic, or heat-sensitive fabrics.
Use an Air Dry (no heat) setting for foam, rubber, plastic,
■
or heat-sensitive fabrics.
Line dry bonded or laminated fabrics.
■
NOTE: If you have questions about drying temperatures for
various loads, refer to the care label directions.
Cycle Details:
Cycle Details: