Right Side Shelf
5
□ Attach fascia to right side shelf with (2) M5x10 hex bolts, (2) M5 flat washers and (1) M4X10 screw. (A)
□
Install (2) M6x13 screws to right side of the fire box, but do not fully tighten. (B)
□ Hang Right Side Shelf onto two installed M6x13 screws on right side of firebox. (B)
□ Attach shelf to firebox as follows:
- From inside to outside of firebox with (3) M6x13 screws and (3) M6 flat washers. (C)
- From outside to inside of firebox with (1) M4x10 screw. (D)
IMPORTANT: Make sure side shelf fascia is aligned with control panel before tightening screws.
□ Fully tighten the screws on right side of firebox to complete attachment of right side shelf. (D)
M5x10 hex bolt
M5 Flat washer
Qty: 2 pcs
Qty: 2 pcs
M5 Flat washers
A
M5x10 Hex Bolts
M4x10 Screw
C
M4 x10 Screw
M6 x13 Screw
Qty: 2 pcs
Qty: 5 pcs
B
M6x13
M6
Screws
Flat Washers
M6 Flat washer
Qty: 3 pcs
D
M4X10 screw
M6x13 screws
Notice: Do not
fully tighten .
Tighten
screws
23