Blackmagic Design Blackmagic Audio Monitor 12G Manual De Instalación Y Funcionamiento página 12

Loudness
This meter displays the subjective quality of loudness in your audio signal. Today's broadcast
standards include loudness metering for consistent audio loudness levels.
The VU and PPM meters feature a selectable reference level of -18dB or -20dB so you can
monitor your audio to suit different international broadcasting standards.
Your Blackmagic Audio Monitor's LED reference behavior will change with each selected meter
type. Stick-on labels with accurate dB reference scales are provided with your
Blackmagic Audio Monitor to help you easily identify where your audio is peaking. To apply the
stick on labels, simply peel and stick the desired scale in between the colored LED meters and
over the current VU scale markings.
Two labels are provided for each audio level meter type and measurement scale. Label sheets
are also available from your local Blackmagic Design support office. Visit the
Blackmagic Design support center at www.blackmagicdesign.com/support to find your local
support team.
To choose a meter setting to display on your Blackmagic Audio Monitor,
click on your desired meter type and then click 'save'.
Stick-on labels are provided so you can accurately identify
where your audio is peaking for each meter type.
Audio Monitor Setup 12