Confirming Dolby Audio - Blackmagic Design Blackmagic Audio Monitor 12G Manual De Instalación Y Funcionamiento

B
Lean the Blackmagic Dolby
decoder module towards the
rear of the chassis until the
metal clips fasten to both sides

Confirming Dolby Audio

When Dolby encoded audio is detected by Blackmagic Audio Monitor the Dolby logo will
appear on the top right corner of the control panel LCD. You can monitor 4 pairs of Dolby
surround channels by pressing the control panel channel up and down buttons.
A
Holding the Blackmagic Dolby
decoder module by the top edges,
align the module's keyway to the
SIMM slot key and gently insert the
module until it is firmly seated.
Installing the optional Blackmagic Dolby® Decoder Module 15