Input; Mute; Volume - Blackmagic Design Blackmagic Audio Monitor 12G Manual De Instalación Y Funcionamiento

Input

Repeatedly pressing the INPUT button cycles through the SDI, AES/EBU, Analog and
HiFi inputs so you can select which video and audio equipment you wish to monitor.
The selected audio input can be listened to via the built in speakers, plus you can monitor the
audio on CH 1 & 2 of the HDMI output.
NOTE
HiFi inputs are selected. The SDI Loop output always outputs the video and audio
connected to the SDI input.

Mute

This button mutes Blackmagic Audio Monitor's control panel speakers and headphones.
Muting the audio will not affect your audio input and will only affect the speakers and
headphones output. Pressing the MUTE button again will restore audio to the control panel
speakers or headphones. Alternatively, increasing the volume will also restore audio.

Volume

This knob adjusts the volume for the speakers or headphones independently. Volume level is
displayed on the built in LCD. When headphones are connected, Blackmagic Audio Monitor's
speakers will mute and audio is outputted via headphones. Volume can easily be adjusted up
or down by turning the volume knob clockwise or counterclockwise.
L
-10 -3 0 +3
R
The volume level is displayed on the control panel LCD.
The HDMI output will display black video when the analog, AES/EBU or
SDI 1080PsF/30 Ch 1&2
Using Blackmagic Audio Monitor 9