Liability Exclusion; Product Description; General Description; Assembly And Controls - Heraeus Dynamix speed Instrucciones De Uso

2.6

Liability Exclusion

Heraeus Kulzer GmbH shall be absolved from all claims for damages or warranty if:
► The product is used for any purposes other than those cited in the instructions for use;
► The product is altered in any way other than those alterations described in the instructions for use;
► The product is repaired by other than an authorized facility or if any but Heraeus OEM parts are used;
► The product continues to be used, despite obvious safety faults or damage;
► The product is subjected to mechanical impacts or is dropped.
► We do not accept any liability for damage caused by mixing tips, foil bags or cartridges splitting.
3.

Product Description

3.1

General Description

The Dynamix speed unit for mixing impression materials facilitates extrusion and mixing of
2-component dental impression materials.
5 : 1 cartridges or foil bags in cartridge holders from different manufacturers can be used in the unit.
GB
With Dynamix speed, impression materials marked with the symbols
- 4 -
and extruded in half the time of conventional impression materials using the corresponding mixing program.
The mixing programs control the feed rate of the plungers and the rotational speed of the hexagonal head.
Only use mixing nozzles which are designated for the impression material by the manufacturer.
Cartridges that are not marked with these symbols must be processed using the "ST" program.
A "remaining amount detector" automatically retracts the plungers' disc to the start position so that the cartridges
can be exchanged quickly.
3.2

Assembly and Controls

(1) Fill level indicator
(2) "Impression tray" advance key
(normal extrusion speed)
(3) "Impression syringe" advance key
(slow extrusion speed)
(4) Retract key
(5) Yellow LED, residual level indicator
(6) Green LED, unit ON
(7) Red LED, unit cover open
(8) Unit cover
(9) Plungers' disc
(10) Spindle covers
(11) Spindles
(12) Catch
(8)
(12)
fig. 1
(10)
(9)
(13)
(14)
or
(7) (6)
(5)
(4)
(3)
(2)
(11)
(15)
can be mixed
(13) Hexagonal end
(14) Cartridge bed
(15) Control keys and LED display for
mixing programs
(16) Mains switch
(17) Fuse
(18) Mains connection
(19) Power cord
(20) Cartridge / Cartridge with tubular bag
(21) Mixing nozzle
(22) Service connector
(1)
(17)
(16)
(21)
(22)
(18)
(19)
(20)