Self Clean - Samsung WF45H6300AG/A2-00 Manual Del Usuario

SELF CLEAN+
Self Clean+ is a self-cleaning cycle that removes mold that may occur inside the washing machine.
1. Press the Power button.
2. Press the Self Clean+ button.
* Once the Self Clean+ button is pressed, the
only function that can be set is Delay End.
3. Press the Start/Pause button.
When you press the Start/Pause button, Self
Clean+ begins.
steam
CAUTION
Extra 5pLn
Using Self Clean+, you can clean the drum, tub and diaphragm without using a cleansing
agent.
Never use Self Clean+ when laundry is in the washing machine. It may cause damage to the
laundry or a problem with the washing machine.
* If you want to use a drum cleansing agent, use only 1/10 of the amount of the drum
cleansing agent recommended by the cleansing agent manufacturer. (When using a
powder type cleansing agent, remove the liquid detergent compartment.)
The Self Clean+ Auto Indicator Function
If the "Self Clean+" button is lit after a wash, it indicates
that tub (drum) cleaning is required. In this case, remove
the laundry from the washing machine, turn the power on,
and clean the drum by running Self Clean+.
If you do not run Self Clean+ after every 40 washes,the
"Self Clean+" indicator turns off after one hour. However,
the "Self Clean+" indicator will light again after five
washes. Not running Self Clean+ at this point will not
cause a problem with the washing machine.
Although the Self Clean+ Auto Indicator appears once a
month or so, the frequency may differ depending on the
number of times the washing machine is used.
..... :::::::::::::::::::::::::::::::: _o,o,_"
English 31
WF45H6-03385A_EN.indd 31 2014-1-10 9:26:42