Microwave Cooking; Timer Function - Danby DMW07A4WDB Manual Del Propietário

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

OPERATING INSTRUCTIONS
FIRST TIME USE
When the appliance is plugged in for the fi rst time,
the display will show "1:01".
When setting the cook timer, the appliance will
return to standby mode if there is no input within 25
seconds.
During operation:
• Press the Start/Stop button to pause the
functioning.
• Press the Start/Stop button again to resume
functioning.
• Press the Reset button to cancel the cooking
program.
The appliance will beep at the end of a cooking
program and will continue to beep every 2 minutes
until a button is pressed or the door is opened.
SETTING THE CLOCK
The clock can be set as a 12 hour clock or a 24
hour clock.
To set the current time:
1. Press the Clock button once to choose a 12 hour
clock. Press the Clock button again to choose a
24 hour clock.
2. Use the number pad to enter the current time.
3. Press the Clock button to confi rm.
During operation, press the Clock button to see the
current time.

TIMER FUNCTION

To set the timer function:
1. Press the Timer button, "TIMER" and "ENTER"
will show on the display and ":" will fl ash.
2. Use the number pad to enter the desired time to
run the microwave.
3. Press the Start/Stop button to begin operation.

MICROWAVE COOKING

To set a cooking power and time:
1. Press the Power/Hold button repeatedly until
the desired cooking level is set, as per the below
chart. If 100% cooking power is desired, only
press the Power/Hold button once.
Press Power/Hold Button
Once
Twice
3 Times
4 Times
5 Times
6 Times
7 Times
8 Times
9 Times
10 Times
11 Times
2. User the number pad to enter the desired
cooking time.
3. Press the Start/Stop button to begin operation.
ADD 30 SECONDS FUNCTION
When the appliance is not in operation, pressing
the Add 30 SEC button will run the appliance for 30
seconds at 100% power level. This button can be
pressed multiple times, each press will add a further
30 seconds to the cooking time.
EXPRESS COOK
When the appliance is not in operation, press the
number pad from 1 to 6 and the appliance will run
between 1 and 6 minutes at 100% cooking power.
7
Cooking Power
100% (P100)
90% (P-90)
80% (P-80)
70% (P-70)
60% (P-60)
50% (P-50)
40% (P-40)
30% (P-30)
20% (P-20)
10% (P-10)
0% (P-00)

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Dmw07a4bdbDmw09a2wdbDmw09a2bdbDmw09a2bssdb

Tabla de contenido