Greencut GHT260X Manual De Instrucciones página 45

• Before adjusting or repairing the machine, stop the engine and remove the spark plug wire.
• Always make motor adjustments with the unit resting on a flat, unobstructed surface.
• Keep cutting instruments sharp and clean. Replace cutting blades or other parts that are cracked, chipped, or
damaged.
• Check that moving parts are not misaligned or jammed, that there are no broken parts or other conditions that
could affect the operation of the machine. Whenever it is damaged, repair it before use.
• At the end of the work, always clean the machine of dust and dirt, do not use grease solvents. Always keep the
machine clean, especially the fuel tank, its surroundings and the air filter.
• Keep handles dry and clean. Dirty handles can cause loss of control.
• Turn off the engine to transport the machine and secure it properly to prevent fuel spillage.
• When transporting or storing the hedge trimmer, always attach the cover of the cutting device.
• Store inactive tools out of the reach of children.
SERVICE
• Have the product checked regularly by a qualified technician and use only original replacement parts. If you have
any questions, please contact the Official Technical Service.
45
EN