ConnectingSpeakerCables; BareWireConnection; BananaPlugs; SpadeConnectors - Monitor Audio Platinum II Serie Guía De Configuración Inicial

1. Side surround speakers
2. Rear surround speakers
A 7.(1) surround system will make use of side (position 1) and rear (position 2) speakers to create a full 360°
soundstage, if setting up a 5.(1) system you can place your surrounds in position (1) or (2).

ConnectingSpeakerCables

BareWireConnection

Unscrew the binding posts and pass the bare wire through the hole in the binding post. Tighten the binding post to
clamp the wire in place.

BananaPlugs

Remove the red and black plastic plugs from the terminals and insert the banana plugs into the standard 4mm holes
that are revealed. Pliers may be required to gain purchase on the plugs.

SpadeConnectors

Unscrew the binding post and place the spade connector around the exposed thread. Tighten the binding post to clamp
the spade connector in place.
4
-22°
-30°
-90°
1
-110°
-135°
-150°
2
Platinum Series II
0°
22°
30°
90°
110°
135°
150°
2
1