Cabling Tv Sets (Other) - Transmitter Module - Loewe Audio 1 Instrucciones De Manejo

Connecting up
Cabling TV sets (other) – Transmitter Module
• Please refer to the directions in the
assembly instructions.
• Plug the Stereo Cinch Klinke cable
supplied to the transmitter module
using the socket AUDIO 1 and to
the TV set (with AC3 module) using
the sockets SR/SL of the audio-
link cinch adapter cable (can be
obtained as an accessory; order
No. 89954.001).
• The power supply provided is to
be equipped with the plug adapter
suitable for your country. Take
the adapter and attach it to the
contact strip of the power supply.
The adapter can only be plugged
on the right way around and is
then slightly to one side. Then
press it to the middle until it clicks
into place.
• Plug the plug of the power sup-
ply into the socket DC IN on
the transmitter module. Plug the
power supply into a 0-40V
50 Hz socket.
Transmitter module
0-40 V 50 Hz
Power supply
Loewe Flat-TV
DC cable
Stereo Cinch Klinke cable
Audio link cinch adapter cable
Loewe Flat TV set
5 -