Product Specification - Simatec simalube 30 Manual Del Usuario

EN

Product Specification

Product
Intended Purpose
Power generation
Working pressure
Adjustment
Dispensing rate
Operating
temperature
Operation/Usage
Risks/Dangers
Certifications/
Approvals
Ingress protection
Usage period
Stock temperature
Weight full
Weight empty
simalube 30
52 mm (2.05 in)
Ø
G 1/4"
Automatic long-term grease and oil lubricator
simalube automatic lubricators are used on machines and devices
of all types. They may be mounted directly or with the aid of special
mounting accessories.
Hydrogen gas producing drycell
Max. 5 bar
Stepless 1–12 months (for standard conditions)
See table on page 11
–20 °C to +55 °C (–4 °F to +131 °F) ambient temperature
(Note: grease consistency changes with temperature)
Grease dispenser can be installed in any position, even under
water. Attention: do not expose to direct heat.
Despite careful design the possibility that skin comes into contact
with lubricant cannot be totally avoided. The lubricant should be
removed immediately with water and recommended solvent.
IP68 (dust- and waterproof)
Activation within 2 years of production date
Recommended at 20 °C ±5 °C (65 °F ±5 °F)
30 ml 60 ml
~82 g ~115 g
~55 g ~60 g
simalube 60
52 mm (2.05 in)
Ø
G 1/4"
II 1G Ex ia IIC T6 Ga
II 1D Ex ia IIIC T80 °C Da
I M1 Ex ia I Ma
125 ml
~190 g
~75 g
simalube 125
52 mm (2.05 in)
Ø
G 1/4"
9
250 ml
~335 g
~111 g
simalube 250
52 mm (2.05 in)
Ø
G 1/4"