BEFORE FIRST USE
1.
Read the manual before use and save it for future
reference.
2.
Remove the packing material and all labels from the
appliance.
3.
Clean the grilling plates with a damp towel or sponge.
Do not immerse the appliance in water and do
not pour water on the grilling plates.
4.
Dry it using tea towel or paper towel.
5.
Spread a piece of butter or a little oil over the grilling
plates.
Note: You may note a slight odour of smoke when you
use the sandwich maker for the first time. This is normal
for most appliances with heating elements and does not
present a threat to safety of your appliance.
OPERATING INSTRUCTIONS
1.
Close the sandwich maker and unplug it. Note that
the power and readiness indicator lights come on,
indicating that the preheating started.
2.
It takes about 3 minutes to reach the grilling
temperature, the readiness indicator then switches
off.
3.
Open the lid and place the food on the lower grilling
plate.
4.
Close the lid. The readiness light comes on again.
5.
After grilling about 2 or 3 minutes the readiness light
switches off again. Adjust the cooking time to your
own taste and favourite degree of doneness.
6.
When your meal is ready, open the lid of the sandwich
maker using the handle. To remove the food, use
a plastic spatula. Never use metal tongs or knife, you
could damage the non-stick surface of the grilling
plates.
7.
Unplug the sandwich maker from the outlet after use
and open it to let it cool.
USE AND DISPOSAL OF WASTE
Wrapping paper and corrugated paperboard – deliver to scrapyard. Packing foil, PE bags, plastic elements – throw into plastic recycling
containers.
DISPOSAL OF PRODUCTS AT THE END OF LIFETIME
Disposal of electric and electronic equipment (valid in EU member countries and other European
countries with an implemented recycling system)
The represented symbol on the product or package means the product shall not be treated as domestic waste. Hand over
the product to the specified location for recycling electric and electronic equipment. Prevent negative impacts on human
health and the environment by properly recycling your product.
Recycling contributes to preserving natural resources. For more information on the recycling of this product, refer to your
local authority, domestic waste processing organization or store, where you purchased the product.
This product complies with EU directive requirements on electromagnetic compatibility and electrical
safety.
The instruction manual is available at website www.ecg-electro.eu.
Changes in text and technical parameters reserved.
Note: The green indicator light flashes on and off,
signalling readiness for grilling, depending how is the
correct temperature of the grilling plates maintained.
MAINTENANCE AND CLEANING
•
Always unplug the power cord before cleaning and
wait until the sandwich maker cools down. It is not
necessary to disassemble the sandwich maker for
cleaning.
•
Gently wipe the food residue from the grilling plates.
Moisten the baked-in residue using a solution of
warm water and detergent and remove it using
a plastic spatula, or place a wet paper towel on the
grilling plates to soak the baked-in residue.
•
Do not use sharp objects, which could scratch the
non-stick surface.
•
Do not use metal tools to remove food, you could
damage the non-stick surface.
•
Wipe the external surface of the appliance using wet
cloth. Do not use cleaning powders or scrubbers for
external surface cleaning. You could damage the
surface finish.
•
Do not immerse in water or other liquids. Do not wash
in the dishwasher.
STORING
•
Always unplug the sandwich maker before storing it.
•
Always make sure before storing that the sandwich
maker is cool and dry.
•
The power cord can be wrapped around the bottom
of the appliance for easy storage.
TECHNICAL SPECIFICATIONS
Nominal voltage: 220–240 V~ 50/60 Hz
Nominal input power: 700 W
GB
08/05
23