Fisher & Paykel RX256DT7X1-22600-A Instructivo De Instalacion Y Guia Del Usuario página 45

T_oubleshootin9
Ice and water
Ice maker is not
producing ice°
Water filter
indicator light is
red°
i,@ iiiii:iili! i! !X!iiiWiW!i iiii! i iii ii !iiili
Ice maker arm is up, Confirm ice maker arm is down, See
.............................................................................................. a ...................
Household water supply is See connecting the water supply,
.... not!e_ch!ng w_te< va!'ve: .... ..................................................
Copper tubing has kinks, Turn off water supply and remove kinks,
If kinks cannot be removed, replace tubing.
Water pressure is too low. Water pressure must be between 35 to 1O0
pounds per square inch to function properly.
A minimum pressure of 35 pounds per
square inch is recommended for refrigerators
with water filters.
Check freezer temperature. See temperature controls pages 12 or 16 to
adjust controls. Freezer must be between 0°
to 2° F (-18 ° to -17 ° C) to produce ice.
Ice bin is not installed See ice storage bin, page 23.
properly.
Improper water valve was See connecting the water supply,
installed, pages 9 - 10. Self--piercing and sad' (4J ram)
saddle valves cause low water pressure
and may dog the line over time, The
manufacturer is not responsible for property
damage due to improper installation or
water connection,
Water filter needs to be If filter is not available, replace with bypass
replaced, cap, See water fi[te(, page 25,
Filter indicator sensor See Filter Status Indicator Light,
needs to be reset page 14 or 23,