▪ We recommend that you inspect the power lead regularly for
any sign of damage.
▪ Do not connect or use an appliance with a damaged lead or
plug. If the power supply cable becomes damaged, it must be
replaced by the distributor, its after-sales service or qualified
individuals in order to avoid any danger.
▪ If the appliance has been damaged, return it to your local
approved repairer or to your point of sale for inspection and
repair.
▪ The appliance is not intended to be operated using an
external timer or separate remote control system.
▪ When using an extension cord, it must be unwound fully to
prevent the cable from overheating.
▪ Always connect and disconnect the power lead, with the
setting on the lowest temperature.
▪ To prevent electric shock, do not immerse the lead, plug or
body of the appliance in water or any other liquid. Do not
handle them with wet hands.
▪ Do not leave the lead hanging from a table or counter.
▪ Do not place the appliance and its lead on or near a surface
which is likely to become hot (cooking plate, gas burner,
oven, etc.).
▪ Disconnect the plug when the appliance is not in use or
before cleaning it.
▪ When cleaning, never immerse the appliance or use a high or
low pressure water spray or a steam cleaner.
▪ Do not use chlorinated products to clean stainless steel.
▪ Do not handle the appliance when hot.
▪ Do not touch hot surfaces.
- 15 -