Fueling The Unit - Troy-Bilt TBE515 Manual Del Usuario

FUELING THE UNIT

WARNING
: Add fuel in a clean, well ventilated
outdoor area. Wipe up any spilled fuel immediately.
Avoid creating a source of ignition for spilt fuel. Do
not start the engine until fuel vapors dissipate.
WARNING
: Gasoline is extremely flammable.
Ignited vapors may explode. Always stop the engine
and allow it to cool before filling the fuel tank. Do
not smoke while filling the tank. Keep sparks and
open flames at a distance from the area.
1. Remove the gas cap.
WARNING
: Remove fuel cap slowly to avoid
injury from fuel spray. Never operate the unit
without the fuel cap securely in place.
2. Place the gas container's spout into the fill hole on the fuel
tank (Fig. 7) and fill the tank.
NOTE: Fill or add gas to the tank only when the edger is in the
horizontal position.
NOTE: Do not overfill the tank.
3. Wipe up any gasoline that may have spilled.
4. Reinstall the gas cap.
5. Move the unit at least 30 ft. (9.1 m) from the fueling source
and site before starting the engine.
NOTE: Dispose of the old gasoline in accordance to Federal,
State and Local regulations.
OIL AND FUEL INFORMATION
Gas Can Spout
Gas Tank
Fig. 7
Gas Cap
7