Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
IRONING SMALL FLAT ITEMS
1.
To iron smaller, flat items such as tea towels, napkins, placemats, etc, place the item
on the support plate and slide it between the heating shoe and iron roller so that it is
caught by the roller when the foot pedal is pressed.
2.
Allow the item to run through.
3.
The ironed item is automatically folded on the collecting table.
IRONING LARGE FLAT ITEMS
To iron larger, flat items such as tablecloths, the center section of the fabric is pressed first,
then the sides of the tablecloth are pressed.
1.
Place the tablecloth centered over the heating shoe with the ends of the tablecloth
falling off each end of the heating shoe. Press the center section of the tablecloth.
2.
With the roller in the raised position, gently pull the fabric back towards you over the
heating shoe.
3.
Softly fold the tablecloth in half and place the tablecloth so that the ironed part hangs
over at one end of the heating shoe. This will prevent pressing a crease into the center
of the tablecloth.
4.
Placing your index finger between the two layers of fabric will act as a guide and allow
you greater control as the tablecloth to feeds through, helping to eliminate the any
unwanted creases. If necessary, turn over the table cloth and iron it on the other side.
16
Publicidad
Tabla de contenido
