How To Use The Appliance; First Time Use; Operating Mode Description - Whirlpool DE 20 LWS0 Manual Del Usuario

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 54

HOW TO USE THE APPLIANCE

After transporting or handling the appliance, wait one hour,
before connecting it to the power supply, make sure that the
surface to prevent leakages. Use the retractable handle to
keep the unit as upright as possible, never on its side. Leave
an appropriate gap as indicated in the "INSTALLATION GUIDE"
paragraph. When the bucket is full or not inserted properly,

OPERATING MODE DESCRIPTION

Switching the appliance on
After connecting the appliance to the power
supply, press ON/OFF to switch the appliance on.
The button can be found on the right hand side
ON/OFF
the control panel (2). The red light of the button
background shines when the product is connected to the power
supply. After pressing the ON/OFF button, the white light of the
(with increasing frequency) simultaneously.
Press the ON/OFF
4 "beeps" (with decreasing frequency) simultaneously. These
selecting any other button.
Selecting the Mode
Auto Cont Quiet Dry
Mode
button is pressed, the operating mode, changes sequentuially:
Auto, ->Cont, ->Quiet, ->Dry. It starts from the last mode
memorised.
Auto Mode: when the Auto indicator lights up, the appliance
operates in automatic mode. The appliance will maintain a 40
- 60% humidity level. In Auto mode, the user can set the fan
speed and the humidity level (see "Setting the fan speed" and
"Setting the humidity level").
If the user does not adjust the humidity level:
level for humans in relation to the current temperature. If the
ambient temperature (Tamb.) is ≤ 20°C, the humidity is set to
60%; when 20°C Tamb. 27°C, the humidity is set to 50%; when
Tamb.>27°C, the humidity is set to 40%.
If the user adjusts the humidity level:
by the user. If the humidity level set by the user exceeds the
approximate humidity measured in the room, the compressor
will stop and the fan will stop after 3 minutes by setting the
time. The LED indicators will remain lit and the adjustment
louvre (3) will remain raised.
Continuous Mode: when the Cont indicator lights up, the
appliance operates in Cont mode. This function is suitable for
places that are extremely humid. In Cont mode the humidity level
cannot be set. When the room's humidity level drops below
20%, the compressor will stop and the fan will stop after 3
minutes by setting the time. The LED indicators will remain lit
and the adjustment louvre (3) will remain raised.
20
Press the Mode button to
select the operating Mode:
Auto, Continuous, Quiet and
Dry. Whenever the Mode
the Water Full indicator (29, full bucket indicator) lights up
and stops the appliance (read the "Water bucket full function"
paragraph). Do not insert small objects, as these are dangerous
and could causes damage.
NOTE:
installed before operating the appliance.
Quiet Mode: when the Quiet indicator lights up, the machine
operates in the Quiet mode. The appliance will automatically
operate at low fan speed. The Fan button is not available in
the Quiet mode. The appliance operates in similar conditions
to the Auto mode.
Dry Mode: when the Dry indicator lights up, the machine
operates in the Dry mode. The appliance will continue to
operate and stabilise the humidity level to prevent mildew
from forming once drying terminates. The fan speed and
humidity level cannot be adjusted in the Dry mode. The Dry
mode is suitable for drying clothing.
NOTE:
In the Auto and Quiet modes, the machine will stop
automatically when the room's humidity level drops
below the set humidity, or below the pre-set comfort
temperature.
In the Dry and Cont modes, the Humidity button is not
available. In the Dry and Quiet modes, the fan speed
cannot be adjusted.
Setting the humidity level
Humidity
30% and 80% (according to the following sequence: 30%
- 40% - 50% - 60% - 70% - 80%). Whenever the Humidity
button is pressed for one second, the humidity is set with
10% increments between 30% and 80%. Afterwards, the set
humidity level will be displayed for 5 sec. The machine will
then resume displaying the current ambient humidity.
In the Cont and Dry modes, the Humidity button is not
available.
Setting the fan speed
High Med Low
Fan
indicate the current fan speed. In the Quiet and Dry modes,
the fan speed cannot be set.
Use & Care Guide
Press the Humidity button to set
the desired level of humidity. Press
and hold the Humidity button
to set 10% increments between
Press the Fan button to set the
fan speed to High, Medium
A uto
or Low. The corresponding
indicator will light up to

Hide quick links:

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

859991058150

Tabla de contenido