Topcom BPM ARM 5000 Manual De Usuario página 8

TOPCOM BPM Arm 5000
8 Memory
When the batteries are removed, the memory will not be
erased.
8
The BPM Arm 5000 has 3 Memory zones. Each can store up to
40 measurements including the date and time
The result will be stored automatically in the selected Memory
Zone after the measurement.
Select the desired Memory Zone before measurement after
pressing the START/STOP button .
To recall measurement results:
When the clock is displayed.
• Press the MEMORY button
• Press the START/STOP button
memory zone.
• Press the MEMORY button
measurement result.
• Press the MEMORY button
stored.
• After the oldest record is displayed, the unit will switch
back to normal time.
To erase all data from one memory zone:
• Press the MEMORY button
• Press the START/STOP button
memory zone.
• Press the MEMORY button
measurement result.
• Press and hold the MEMORY button
erase all records from the selected memory zone.
to enter memory mode.
M
select the desired
to see the last
M
repeatedly for prior values
M
to enter memory mode.
M
select the desired
to see the last
for 3 seconds to
M