Panasonic AJ-YBX200G Instrucciones De Funcionamiento página 5

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 34
6
Place the AJ-YBX200G into the terminal of
the board in Step
four 2.6 mm screws.
2.6 mm
screws
7
Reconnect the cable removed in Step
it was originally.
8
Reinsert the No.5 board into its original
position. In this operation, allow the cable
connected in Step
the No.5 board. (See Figure
flexible cables removed in Step
original positions.
9
Return the side panel to the original
position and secure it with the screws. In
this operation, ensure that the cable
disconnected in Step
slot.
If the flexible cables are not locked or the
board is inserted at a slant, the camera
recorder may have trouble recording.
5
and fix it by using the
5
7
to run along the slot of
5
) Insert the
4
into the
5
is not caught in the
as
E-4

Publicidad

Tabla de contenido
loading

Tabla de contenido