Settings For The Aj-Hpm100; Setup Menu - Panasonic AJ-YBX200G Instrucciones De Funcionamiento

6
Place the AJ-YBX200G into the terminal of
the AJ-HPM100 running along the slot of
AJ-HPM100, and secure it using the two
3.0 mm screws.
Screws

Settings for the AJ-HPM100

When recording with the AJ-HPM100 using the AVC-Intra codec, settings are adjusted in the setup
menu.
See the operation manual of the main body for instructions on how to configure the setup menu.
Recording format
1080/59.94i
AVC-Intra 100
720/59.94P
1080/59.94i
AVC-Intra 50
720/59.94P
1080/50i
AVC-Intra 100
720/50P
1080/50i
AVC-Intra 50
720/50P
During playback, the format is automatically identified. However, clips with a different system
frequency cannot be played.

Setup menu

When this product is equipped with the AJ-HPM100, the following setup menu becomes available.
Item
FR No. SUPER DISP. FR No. SUPER DISP.
025 REC FMT(HD)
is the factory setting mode.
E-7
Slot
25: SYSTEM FREQ
59.94
50
Setting
0000 DVCPRO
0001 AVC50
0002 AVC100
7
Replace the top panel, and screw it on.
Settings of the setup menu
020: SYS FORMAT
1080i
720p
1080i
720p
1080i
720p
1080i
720p
Setting details and description of outline function
Select the recording format when menu No. 020 SYS FORMAT
is set to 1080i or 720p.
0: Select DVCPRO HD (100 Mbps).
1: Select AVC-Intra 50.
2: Select AVC-Intra 100.
025: REC FMT (HD)
AVC100
AVC50
AVC100
AVC50