Safety Instructions; Shipping And Storage; Assembly And Adjustments; Using Your Streeter - Vermeiren Streeter Serie Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 23
EN
NL
It is not intended for transport of goods and/or
more people than the user.
It should only be used on surfaces where all
wheels are touching the ground. Do not use
the Streeter on rocky, bumpy or sandy terrain,
or places with a steep inclination. The Streeter
may become unstable. Look for flat, stable
areas, and bevelled kerbs to walk with your
Streeter.
Please check all technical details and limits of
your Streeter in §7.
The warranty on this product is based on
normal use and maintenance as described in
this manual. Damage to your product caused
by improper use or lack of maintenance will
cause the warranty to lapse.

3.3 Safety instructions

CAUTION
Please read and follow the instructions in
this manual. Otherwise you may get
injured, or your Streeter may get damaged.
• Check that no stones or other objects
block the wheels of the Streeter.
• While walking, keep both hands on the
handgrips.
• Be aware that some parts of your Streeter
may get very hot or cold due to ambient
temperature,
devices, etc. Be careful when touching.
• Do not hold the handgrips with wet hands.
If you do so, you can lose your grip and
lose your balance.
• Do not proceed with your Streeter into
traffic. Always stay on the pavement.
• Take note of the instructions for care and
service. The manufacturer is not liable for
damage caused by improper servicing /
care.
3.4
Symbols on the Streeter
Identification plate is located on the left
rear leg at the inner side of the base frame
Maximum weight of user in kg
Type designation
Risk of injuries
solar
radiation,
heating

3.5 Shipping and storage

The shipping and storage of the Streeter
should happen according to the technical
specifications in §7. Make sure that the
Streeter is stored dry.
Provide sufficient covering or packaging to
protect the Streeter from rust and foreign
bodies (e.g. salt water, sea air, sand, dust).
Make sure no objects are stored on or against
the Streeter to prevent damage.
4

Assembly and adjustments

1. Press the spring button until the leg is
unlocked.
2. Adjust the leg to the desired length and
check that the spring button is secured
again into place.
3. Make sure that all legs are adjusted to the
same height.
5

Using your Streeter

5.1
Unfolding / folding
CAUTION
Keep fingers, buckles, jewellery and
clothes away from the folding mechanism.
CAUTION
Check that the Streeter is completely open
before use and that the frame is locked.
2
Streeter
2020-04
Risk of entrapment
Risk of falling

Publicidad

Capítulos

Tabla de contenido
loading

Tabla de contenido