GBC ShredMaster SC032 Manual De Instrucciones página 4

GBC5151 SC032-CC055 Manual EU
ShredMaster
Installation
Position the shredder onto the basket. Once the unit is
correctly positioned on the basket, plug it into a standard AC
outlet. (NOTE: The cross-cut model includes safety interlocks.
If the unit is not properly positioned on the basket the
interlocks will not be activated and the unit will not operate.)
Materials you can shred
Your shredder will handle most any type of office paper
documents. You can safely shred documents containing
staples, however, other metal items may damage the
shredder.
On/Auto
Simply insert paper into the centre of the throat. Once your
document has activated the trigger switch, the unit will turn
on and off automatically.
Specifications
Throat Width
Shred Width
Sheet Capacity*
Speed
Amperage
Noise Level
Duty Cycle
Volts/Hz
* Meassured using standard 80gm/m
standard paper may damage or shorten the lifetime of the shredder
knives.
Guarantee
Operation of this machine is guaranteed for two years from
date of purchase, subject to normal use. Within the guarantee
period, GBC will at its own discretion either repair or replace
the defective machine free of charge. Defects due to misuse
or use for inappropriate purposes are not covered under the
guarantee. Proof of date of purchase will be required. Repairs
Register this product online at www.gbceurope.com
19/12/05
® SC032/CC055
SC032 CC055
220 mm 220 mm
6 mm 4 x 40 mm
6 sheets 6 sheets
4.0 meters 3.0 meters
per minute per minute
0.8 Amps 1.0 Amps
75 dB 75 dB
2/30 Min 2/30 Min
(ON/OFF) (ON/OFF)
230V/50Hz 230V/50Hz
2 paper. Shredding other than
11:34 Page 4
Forward and Reverse
Moving the switch to either of these positions will cause the
unit to run in the corresponding direction.
Clearing Jams
If a paper jam occurs, switch the unit to the reverse position
until the paper is out of the throat. If a jam occurs with paper
more than halfway through the cutters momentarily switch
into the REVERSE position until about 1/2" to 1" of shredded
paper reverses out. Tear off two or three sheets and switch
into the FORWARD position to clear the paper jam. In some
cases, it may be necessary to alternate between FORWARD
and REVERSE positions several times to help clear excess
paper from the cutting area.
Thermal Cut-off Feature
This shredder is designed for low volume shredding, and is
not intended for continuous operation. This unit features a
thermal cut-off device that automatically shuts off the
shredder if run for an extended period of time. If this occurs,
simply allow the shredder to cool for 30 minutes before
resuming operation.
Shred Credit Cards (SC032 only)
You can shred Max. 5 credit cards a day. Feed the credit
card either on the left side or on the right side of the
shredder throat, narrow edge first (3). Do not feed wide
edge first.(4).
Service
Do not attempt to service or repair the unit yourself. If your
shredder is under warranty return it to the point of purchase
for replacement or repair. If your shredder is no longer under
the point of purchase return period and requires replacement
or repair, please contact your supplier for further assistance.
or alterations made by persons not authorised by GBC will
invalidate the guarantee. It is our aim to ensure that our
products perform to the specifications stated. This guarantee
does not affect the legal rights which consumers have under
applicable national legislation governing the sale of goods.