Parts List; Boulons Carrossiers De ¼" X ½ - Triton ABA020 Instrucciones De Uso

PARTS LIST

A. Base Bracket (1)
D. Band Clamps (2)
G. T-Knob (1)
H. ¼" x ¾" Coach Bolts (2)
I. ¼" x ½" Coach Bolts (3)
J. ¼" Nuts (4)
K. ¼" Spring Washers (4)
NOTES
• This saw stabilising bracket has been specifically designed for saws that pivot at the front for blade
height changes (for example, Makita, Hitachi, Black & Decker and Skil saws). The bracket can be fitted to
vertical lift saws, but benefits will be limited to increased stability when the saw is tilted for bevel cutting,
or raised for rebates etc. With vertical lift saws, resetting of the bracket is required on each occasion the
blade height is altered or the saw tilted.
• Begin with your Workcentre in the crosscut mode, with the slide chassis in the bearing channels. Set your
saw at full cutting depth, with the saw's quadrant at 0° (normal 90° crosscutting position).
B. Pivot Mounting Bracket (1)
E. Saw Motor Bracket (1)
FASTENER BAG
C. Slotted Strap (1)
F. Rubber Cushion
Strip (1)
L. ¼" Nyloc Nut (1)
M. ¾" O.D. x 5/16" I.D. Flat
Washer (1)
N. ¾" O.D. x ¼" I.D. Flat
Washer (1)
O. ¼" Wing Nut (1)
Parts List
GB
3