Tracing Underground Wires; Tracing Low Voltage Wires And Data Cables - Ampro AT-6010 Serie Manual De Usuario

4. SPECIAL APPLICATIONS
Figure 4.6b: Tracing a shielded wire disconnected from the ground at far-end

4.7 Tracing Underground Wires

The AT-6010 can trace Energized and De-energized wires underground the same way it can
locate wires behind walls or floors. Follow general wire tracing instructions in section 3.

4.8 Tracing Low Voltage Wires and Data Cables

The AT-6010 can trace data, audio and thermostat cables (to trace shielded data cables, refer to
section 4.6).
Trace data, audio, and thermostat cables
1. Connect the Transmitter using the separate ground method described in section 3.1.
2. Turn on the Receiver and trace the wire. Tracing mode is automatically activated.
Figure 4.7: Tracing underground wires
18