Ampro AT-6010 Serie Manual De Usuario página 27

5. MAINTENANCE
Changing the Receiver Batteries
The battery compartment on the back of the Receiver is designed to make it easy for the user to
change the batteries. Use four (4) AA 1.5 V alkaline batteries.
Note: Batteries do not come pre-installed in the Receiver.
1. Make sure that the Receiver is turned off.
2. Use a screw driver to unscrew the captive screw.
3. Remove the battery cover.
4. Install batteries.
5. Replace the battery cover and secure it with the provided screw.
4 x AA batteries
Figure 5.1b: Changing the Receiver batteries
23