EGi MILLENIUM 1202 Manual Del Usuario página 32

Control console. Advanced functions
32.
8 Changing the Public Address volume level
in a zone
If three groups -for instance- have been previously
created:
GENERAL (And then the sign "<" appears next
to GENERAL) + ZONE
Provided that there are 3 numbered zones in the
system:
ZON 001 (And then the sign "<" appears next to
ZON 001) +
+ o – modifies the volume level of the paging in
the selected zone.
1202
9 Enabling and disabling the "private" mode
in a zone
If three groups -for instance- have been previously
created:
GENERAL (And then the sign "<" appears next
to GENERAL) + ZONE
Provided that there are 3 numbered zones in the
system:
ZON 001 (And then the sign "<" appears next to
ZON 001) +
PRIVATE
ENABLE or DISABLE enables or disables the
private mode of a zone.
If the general access password is active the system will require us to introduce it every time we try to operate one of
the advanced functions (see point 2 of "Access restrictions").
10 Changing the pre-warning tone of an
announcement
If three groups -for instance- have been previously
created:
SETUP
Provided that the general access password is
NOT active, and there is NEITHER a pre-recorded
message player (1103) NOR a module for sending
messages over the telephone (1104) in the system:
BELL
TONE 2 (And then the sign "<" appears next
to TONE 2) changes the pre-warning tone of the
announcement.
11 Changing the operation language
If three groups -for instance- have been previously
created:
SETUP
Provided that the general access password is
NOT active, and there is NEITHER a pre-recorded
message player (1103) NOR a module for sending
messages over the telephone (1104) in the system:
LANG.
ENGLISh (And then the sign "<" appears next
to ENGLISH) changes the operation language.